R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

# Create MD_A (level 5) on Router B, create MA_A, which serves VLAN 100, in MD_A, and

then create service instance 1 for MD_A and MA_A. In addition, create MD_B (level 3) and

MA_B that serves VLAN 100, in MD_B, and then create service instance 2 for MD_B and MA_B.

[RouterB] cfd md MD_A level 5

[RouterB] cfd ma MA_A md MD_A vlan 100

[RouterB] cfd service-instance 1 md MD_A ma MA_A

[RouterB] cfd md MD_B level 3

[RouterB] cfd ma MA_B md MD_B vlan 100

[RouterB] cfd service-instance 2 md MD_B ma MA_B

Configure Router D in the same way Router B is configured.

# Create MD_B (level 3) on Router C, create MA_B, which serves VLAN 100, in MD_B, and

then create service instance 2 for MD_B and MA_B.

[RouterC] cfd md MD_B level 3

[RouterC] cfd ma MA_B md MD_B vlan 100

[RouterC] cfd service-instance 2 md MD_B ma MA_B

4. Configure MEPs:

# On Router A, configure a MEP list in service instance 1. Create and enable inward-facing MEP

1001 in service instance 1 on GigabitEthernet 3/0/1.

[RouterA] cfd meplist 1001 4002 5001 service-instance 1

[RouterA] interface gigabitethernet 3/0/1

[RouterA-GigabitEthernet3/0/1] cfd mep 1001 service-instance 1 inbound

[RouterA-GigabitEthernet3/0/1] cfd mep service-instance 1 mep 1001 enable

[RouterA-GigabitEthernet3/0/1] quit

# On Router B, configure a MEP list in service instances 1 and 2, respectively. Create and

enable outward-facing MEP 2001 in service instance 2 on GigabitEthernet 3/0/3.

[RouterB] cfd meplist 1001 4002 5001 service-instance 1

[RouterB] cfd meplist 2001 4001 service-instance 2

[RouterB] interface gigabitethernet 3/0/3

[RouterB-GigabitEthernet3/0/3] cfd mep 2001 service-instance 2 outbound

[RouterB-GigabitEthernet3/0/3] cfd mep service-instance 2 mep 2001 enable

[RouterB-GigabitEthernet3/0/3] quit

# On Router D, configure a MEP list in service instances 1 and 2, respectively, create and

enable outward-facing MEP 4001 in service instance 2 on GigabitEthernet 3/0/1, and then

create and enable inward-facing MEP 4002 in service instance 1 on GigabitEthernet 3/0/3.

[RouterD] cfd meplist 1001 4002 5001 service-instance 1

[RouterD] cfd meplist 2001 4001 service-instance 2

[RouterD] interface gigabitethernet 3/0/1

[RouterD-GigabitEthernet3/0/1] cfd mep 4001 service-instance 2 outbound

[RouterD-GigabitEthernet3/0/1] cfd mep service-instance 2 mep 4001 enable

[RouterD-GigabitEthernet3/0/1] quit

[RouterD] interface gigabitethernet 3/0/3

[RouterD-GigabitEthernet3/0/3] cfd mep 4002 service-instance 1 inbound

[RouterD-GigabitEthernet3/0/3] cfd mep service-instance 1 mep 4002 enable

[RouterD-GigabitEthernet3/0/3] quit

# On Router E, configure a MEP list in service instance 1. Create and enable inward-facing MEP

5001 in service instance 1 on GigabitEthernet 3/0/4.

[RouterE] cfd meplist 1001 4002 5001 service-instance 1