R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

89
To configure an RRPP ring group:
Step
Command
1. Enter system view.
system-view
2. Create an RRPP ring group and enter RRPP ring
group view.
rrpp ring-group ring-group-id
3. Assign the specified subrings to the RRPP ring
group.
domain domain-id ring ring-id-list
Displaying and maintaining RRPP
Task
Command
Remarks
Display brief RRPP information.
display rrpp brief [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display RRPP group configuration
information.
display rrpp ring-group
[ ring-group-id ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display detailed RRPP information.
display rrpp verbose domain
domain-id [ ring ring-id ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display RRPP statistics.
display rrpp statistics domain
domain-id [ ring ring-id ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear RRPP statistics.
reset rrpp statistics domain
domain-id [ ring ring-id ]
Available in user view.
RRPP configuration examples
Single ring configuration example
Networking requirements
As shown in Figure 24,
 Router A, Router B, Router C, and Router D form RRPP domain 1. Specify the primary control
VLAN of RRPP domain 1 as VLAN 4092, and specify that RRPP domain 1 protects VLANs 1
through 30.
 Router A, Router B, Router C, and Router D form primary ring 1.
 Specify Router A as the master node of primary ring 1, GigabitEthernet 3/0/1 as the primary
port and GigabitEthernet 3/0/2 as the secondary port.