R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

2
Views
Ethernet interface view (combo interface)
Default command level
2: System level
Parameters
copper: Activates the copper(electrical) combo port.
fiber: Activates the fiber (optical) combo port.
Usage guidelines
Combo interfaces are logical interfaces. A combo interface comprises one fiber combo port and one
copper combo port. The two ports cannot work simultaneously. If one port is enabled, the other port is
automatically disabled.
Examples
# Activate the copper combo port of combo interface GigabitEthernet 5/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 5/0/1
[Sysname-GigabitEthernet5/0/1] combo enable copper
# Activate the fiber combo port of combo interface GigabitEthernet 5/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 5/0/1
[Sysname-GigabitEthernet5/0/1] combo enable fiber
default
Use default to restore the default settings for an Ethernet interface or subinterface.
Syntax
default
Views
Ethernet interface view, Ethernet subinterface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.