R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

160
Parameters
0: Sets the national bit to 0 for national communication.
1: Sets the national bit to 1 for international communication.
Usage guidelines
You need to set the national bit to 0 on an E3 interface only in some special circumstances.
Examples
# Set the national bit to 0 on interface E3 2/0/0.
<Sysname> system-view
[Sysname] controller e3 2/0/0
[Sysname-E3 2/0/0] national-bit 0
Related commands
controller e3
reset counters controller e3
Use reset counters controller e3 to clear the controller counter of a CE3 interface.
Syntax
reset counters controller e3 interface-number
Views
User view
Default command level
2: System level
Parameters
interface-number: Interface number.
Usage guidelines
You can use the display controller e3 command to display the statistics collected by the controller
counters of CE3 interfaces.
The reset counters interface command clears the counters of all interfaces. To clear the controller counter
of individual CE3 interfaces, use the reset counters controller e3 command.
Examples
# Clear the controller counter of the CE3 interface E3 2/0/0.
<Sysname> reset counters controller e3 2/0/0
using (CE3 interface)
Use using to configure the operating mode of the CE3 interface.
Use undo using to restore the default.
Syntax
using { ce3 | e3 }
undo using