R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

165
Syntax
controller t3 interface-number
Views
System view
Default command level
2: System level
Parameters
interface-number: CT3 interface number.
Examples
# Enter the view of interface T3 2/0/0.
<Sysname> system-view
[Sysname] controller t3 2/0/0
[Sysname-T3 2/0/0]
Related commands
display controller t3
crc
Use crc to configure CRC mode for the serial interface formed on CT3 interfaces.
Use undo crc to restore the default
Syntax
crc { 16 | 32 | none }
undo crc
Default
The CRC mode for the serial interface formed on CT3 interfaces is 16-bit CRC.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
16: Adopts 16-bit CRC.
32: Adopts 32-bit CRC.
none: Adopts no CRC.
Examples
# Apply 32-bit CRC to a serial interface formed on interface T3 2/0/0 in unchannelized mode.
<Sysname> system-view
[Sysname] controller t3 2/0/0
[Sysname-T3 2/0/0] using t3
[Sysname-T3 2/0/0] quit