R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

192
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Pos2/1/0 ADM Administratively
Table 23 Command output
Field Descri
p
tion
current state
Current state of the POS interface:
• DOWN (Administratively)—The POS interface has
been shut down with the shutdown command and
is administratively down.
• DOWN—The POS interface is physically down
because no physical connection is present or the
link has failed.
• UP—The POS interface is both administratively
and physically up.
Line protocol current state Link layer state of the POS interface.
Description Description on the POS interface.
The Maximum Transmit Unit is 1500, Hold timer is
10(sec)
MTU of the POS interface and the interval at which the
link layer protocol sends keepalives.
Internet protocol processing
IP protocol processing capability, enabled or
disabled.
Link layer protocol is PPP
Link layer protocol of the POS interface and loopback
detection state.
LCP opened, IPCP opened, IP6CP opened LCP state, IPCP state, and IPv6CP state.
Physical layer is Pos2/1/0, Baudrate is 155520000
bit/s
Physical interface name and baudrate.
Scramble enabled, crc 32, clock slave, loopback not
set
Payload scrambling state, CRC count, clock mode,
and loopback state on the interface.
Output queue : (Urgent queue :
Size/Length/Discards)
Urgent queue: the number of packets in the queue, the
queue length, the number of packets dropped in the
queue.
Output queue : (Protocol queue :
Size/Length/Discards)
Protocol queue: the number of packets in the queue,
the queue length, the number of packets dropped in
the queue.
Output queue : (FIFO queuing :
Size/Length/Discards)
FIFO queue: the number of packets in the queue, the
queue length, the number of packets dropped in the
queue.
Last clearing of counters Time when the counters were last cleared.
Last 300 seconds input rate 0 bytes/sec, 0 bits/sec, 0
packets/sec
Input rate in Bps, bps, and pps in the last 300
seconds.
Last 300 seconds output rate 0 bytes/sec, 0 bits/sec,
0 packets/sec
Output rate in Bps, bps, and pps in the last 300
seconds.
Input: 31 packets, 484 bytes Count of input traffic in both packets and bytes.
Output:29 packets, 460 bytes Count of output traffic in both packets and bytes.
The brief information of interface(s) under route mode Brief information about Layer 3 interfaces.