R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

224
Default command level
2: System level
Parameters
e3-number: Number of an E3 channel on the current CPOS interface, in the range of 1 to 3.
0: Sets the national bit to 0 for national communication.
1: Sets the national bit to 1 for international communication.
Examples
# Set the national bit of E3 channel 1 on interface CPOS 2/0/0 to 1.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] e3 1 set national-bit 1
e3 shutdown
Use e3 shutdown to shut down the specified E3 channel.
Use undo e3 shutdown to bring up the specified E3 channel.
Syntax
e3 e3-number shutdown
undo e3 e3-number shutdown
Default
An E3 channel is up.
Views
CPOS interface view
Default command level
2: System level
Parameters
e3-number: Number of an E3 channel on the current CPOS interface, in the range of 1 to 3.
Examples
# Shut down E3 channel 1 on interface CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] e3 1 shutdown
fe3
Use fe3 to configure the specified E3 channel to operate in FE3 mode and configure its FE3 DSU mode
or FE3 subrate.
Use undo fe3 to restore the default DSU mode or subrate.
Syntax
fe3 e3-number { dsu-mode { 0 | 1 } | subrate sub-number }