R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

58
Field Descri
p
tion
Line Error: 0 FERR, 0 LCV, 0
CERR, 0 FEBE
A line error occurs.
The brief information of
interface(s) under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
Link status:
• ADM—The interface has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
• Stby—The interface is operating as a backup interface. To view the
primary interface, use the display standby state command described in
High Availability Command Reference.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but its link
is an on-demand link or not present at all, its protocol attribute includes the
spoofing flag (an s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut down. To recover its
physical state, use the undo shutdown command.
Protocol Protocol connection state of the interface: UP, DOWN, or UP(s).
Main IP Main IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been shut down with the
shutdown command, this field displays Administratively. To restore the
physical state of the interface, use the undo shutdown command.
Related commands
interface atm
interface atm
Use interface atm to enter ATM interface view.
Syntax
interface atm interface-number
Views
System view
Default command level
2: System level
Parameters
interface-number: ATM interface number.
Examples
# Enter ATM 5/1/0 interface view.