R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

60
If you do not specify the atm keyword, this command clears the statistics of all interfaces.
If you specify atm but not interface-number, this command clears the statistics of the PVCs of all ATM
interfaces.
If you specify both atm and interface-number, this command clears the statistics of the PVCs of the
specified ATM interface.
Examples
# Clear the statistics of ATM interface ATM 5/1/0.
<Sysname> reset counters interface atm 5/1/0
shutdown
Use shutdown to shut down the interface.
Use undo shutdown to bring up the interface.
Syntax
shutdown
undo shutdown
Default
ATM interfaces are up.
Views
ATM E1 interface view, ATM T1 interface view, ATM E3 interface view, ATM T3 interface view, ATM
OC-3c interface view, ATM STM-1 interface view
Default command level
2: System level
Usage guidelines
When you modify parameters on an interface, execute the shutdown command, and then the undo
shutdown command to make your modifications take effect.
Examples
# Shut down interface ATM 3/1/0.
<Sysname> system-view
[Sysname] interface atm 3/1/0
[Sysname-Atm3/1/0] shutdown
IMA-E1/T1 interface configuration commands
cable
Use cable to set the cable mode of the ATM E1/T1 interface.
Use undo cable to restore the default.
Syntax
cable { long | short }