R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

215
<Sysname> display bgp multicast routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 20.20.20.1 0 200 300i
Table 47 Command output
Field Descri
p
tion
Total Number of Routes Total number of routes.
BGP Local router ID BGP local router ID.
Status codes
Status codes:
• * – valid—Valid route.
• ^ – VPNv4 best—Best VPNv4 route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• i – internal—Internal route.
• s – suppressed—Suppressed route.
• S – Stale—Stale route.
Origin
Origin attributes:
• i – IGP—Originated in the AS.
• e – EGP—Learned through EGP.
• ? – incomplete—Learned by some other means.
Network Destination network address.
Next Hop Next hop.
MED Measurement value of the route.
LocPrf Local preference value.
PrefVal Preferred value of the route.
Path
AS_PATH attribute, which records the ASs that the packet has passed
to avoid routing loops.
Ogn
Origin attributes:
• i—The route is interior to the AS. Summary routes and the routes
injected through the network command are considered IGP routes.
• e—The route is learned from the Exterior Gateway Protocol (EGP).
• ?—Short for "incomplete." It indicates that the origin of the route is
unknown and the route is learned by some other means. BGP marks
routes redistributed from IGP as incomplete.