R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

292
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the MLD proxying group information of all interfaces.
<Sysname> display mld proxying group verbose
Proxying group record(s) information
Total 1 MLD-Proxying group record(s)
Group: FF03::101
Group mode: include
Member state: Delay
Expires: 00:00:02
Source list (total 1 source(s))
Source: 30::1
Table 69 Command output
Field Description
Proxying group record(s) information Information of MLD proxying groups on the interfaces.
Total 1 MLD-Proxying group record(s) One MLD proxying group is recorded.
Group IPv6 multicast group address.
Member state
State of the member hosts:
• Delay.
• Idle.
Expires
Remaining time of the IPv6 multicast group, where
"off" means that the group never times out.
Group mode
IPv6 multicast source filtering modes:
• Include.
• Exclude.
Source list
A list of IPv6 multicast sources that the hosts want to
receive information from.
display mld routing-table
Use display mld routing-table to display information about the MLD routing table.
Syntax
display mld routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] |
flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view