R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

305
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD last listener query interval in seconds, in the range of 1 to 5.
Examples
# Set the MLD last listener query interval to 3 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld last-listener-query-interval 3
Related commands
• display mld interface
• last-listener-query-interval
• mld robust-count
mld max-response-time
Use mld max-response-time to configure the maximum response time for MLD general query messages
on the interface.
Use undo mld max-response-time to restore the default.
Syntax
mld max-response-time interval
undo mld max-response-time
Default
The maximum response delay for MLD general query messages is 10 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies the maximum response time for MLD general query messages in seconds, in the range
of 1 to 25.
Usage guidelines
The maximum response time determines the time which the device takes to detect directly attached group
members in the LAN.
Examples
# Set the maximum response delay for MLD general query messages to 8 seconds on GigabitEthernet
2/1/1.
<Sysname> system-view