R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

312
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld static-group ff03::101
# Configure GigabitEthernet 2/1/1 as a static member of multicast source and group (2001::101,
FF3E::202).
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld static-group ff3e::202 source 2001::101
mld timer other-querier-present
Use mld timer other-querier-present to configure the MLD other querier present interval on the current
interface.
Use undo mld timer other-querier-present to restore the default.
Syntax
mld timer other-querier-present interval
undo mld timer other-querier-present
Default
MLD other querier present interval = [ MLD query interval ] × [ MLD querier's robustness variable ] +
[ maximum response delay for MLD general queries ] /2.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD other querier present interval in seconds, in the range of 60 to 300.
Examples
# Set the MLD other querier present interval to 200 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld timer other-querier-present 200
Related commands
• display mld interface
• mld max-response-time
• mld robust-count
• mld timer query
• timer other-querier-present
mld timer query
Use mld timer query to configure the MLD query interval on the current interface.