R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

23
igmp-snooping querier
Use igmp-snooping querier to enable the IGMP snooping querier function.
Use undo igmp-snooping querier to disable the IGMP snooping querier function.
Syntax
igmp-snooping querier
undo igmp-snooping querier
Default
The IGMP snooping querier function is disabled.
Views
VLAN view
Default command level
2: System level
Usage guidelines
This command takes effect only if IGMP snooping is enabled in the VLAN.
Examples
# Enable IGMP snooping and the IGMP snooping querier function for VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping querier
Related commands
igmp-snooping enable
igmp-snooping query-interval
Use igmp-snooping query-interval to configure the interval for sending IGMP general queries.
Use undo igmp-snooping query-interval to restore the default.
Syntax
igmp-snooping query-interval interval
undo igmp-snooping query-interval
Default
The IGMP general query interval is 60 seconds.
Views
VLAN view
Default command level
2: System level