R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

358
Parameters
priority: Specifies a router priority for DR election, in the range of 0 to 4294967295. A larger value
indicates a higher priority.
Examples
# Set the router priority for DR election to 3 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option dr-priority 3
Related commands
hello-option dr-priority
pim ipv6 hello-option holdtime
Use pim ipv6 hello-option holdtime to configure the PIM neighbor timeout timer on the current interface.
Use undo pim ipv6 hello-option holdtime to restore the default.
Syntax
pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
Default
The IPv6 PIM neighbor timeout timer is 105 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an IPv6 PIM neighbor timeout timer in seconds. The value ranges from 1 to 65535. A
value of 65535 makes the PIM neighbor always reachable.
Examples
# Set the IPv6 PIM neighbor timeout timer to 120 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option holdtime 120
Related commands
hello-option holdtime
pim ipv6 hello-option lan-delay
Use pim ipv6 hello-option lan-delay to configure the LAN-delay time( namely, the time that the device
waits before forwarding a received prune message, on the current interface).
Use undo pim ipv6 hello-option lan-delay to restore the default.