R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

428
PIM snooping configuration commands
The commands in this chapter are available only when the SAP module is operating in bridge mode.
display pim-snooping neighbor
Use display pim-snooping neighbor to display PIM snooping neighbor information.
Syntax
display pim-snooping neighbor [ [ vlan vlan-id ] [ slot slot-number ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Displays PIM snooping neighbor information of the card specified by its slot number. If
no slot is specified, the command displays the PIM snooping neighbor information of all cards.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify a VLAN, this command displays PIM snooping neighbor information in all VLANs.
Examples
# Display PIM snooping neighbor information in VLAN 2.
<Sysname> display pim-snooping neighbor vlan 2
Total number of neighbors: 2
VLAN ID: 2
Total number of neighbors: 2
Neighbor Port Expires Option Flags
10.1.1.2 GE2/0/1 02:02:23 LAN Prune Delay(T)
20.1.1.2 GE2/0/2 03:00:05 LAN Prune Delay