R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-G Router

251

252

253

254

255

256

257

258

259

260

Table Of Contents

249

[P-GigabitEthernet2/1/1] ip address 192.168.6.2 24

[P-GigabitEthernet2/1/1] pim sm

[P-GigabitEthernet2/1/1] mpls

[P-GigabitEthernet2/1/1] mpls ldp

[P-GigabitEthernet2/1/1] quit

# Configure an IP address, enable PIM-SM and LDP capability on the public network interface

GigabitEthernet 2/1/2.

[P] interface gigabitethernet 2/1/2

[P-GigabitEthernet2/1/2] ip address 192.168.7.2 24

[P-GigabitEthernet2/1/2] pim sm

[P-GigabitEthernet2/1/2] mpls

[P-GigabitEthernet2/1/2] mpls ldp

[P-GigabitEthernet2/1/2] quit

# Configure an IP address, enable PIM-SM and LDP capability on the public network interface

GigabitEthernet 2/1/3.

[P] interface gigabitethernet 2/1/3

[P-GigabitEthernet2/1/3] ip address 192.168.8.2 24

[P-GigabitEthernet2/1/3] pim sm

[P-GigabitEthernet2/1/3] mpls

[P-GigabitEthernet2/1/3] mpls ldp

[P-GigabitEthernet2/1/3] quit

# Configure an IP address for Loopback 1 and enable PIM-SM on the interface.

[P] interface loopback 1

[P-LoopBack1] ip address 2.2.2.2 32

[P-LoopBack1] pim sm

[P-LoopBack1] quit

# Configure Loopback 1 as a C-BSR and C-RP on the public network.

[P] pim

[P-pim] c-bsr loopback 1

[P-pim] c-rp loopback 1

[P-pim] quit

# Configure OSPF.

[P] ospf 1

[P-ospf-1] area 0.0.0.0

[P-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0

[P-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.255.255

5. Configure CE a1:

# Enable IP multicast routing.

<CEa1> system-view

[CEa1] multicast routing-enable

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/1.

[CEa1] interface gigabitethernet 2/1/1

[CEa1-GigabitEthernet2/1/1] ip address 10.110.7.1 24

[CEa1-GigabitEthernet2/1/1] pim sm

[CEa1-GigabitEthernet2/1/1] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/2.

[CEa1] interface gigabitethernet 2/1/2