R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide

360
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::100)
RP: 1003::2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:14:44
Upstream interface: GigabitEthernet2/1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/1/0
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# Display IPv6 PIM routing table information on Router E.
[RouterE] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, FF0E::100)
RP: 1003::2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:16:56
Upstream interface: Register
Upstream neighbor: 4002::1
RPF prime neighbor: 4002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/1/2
Protocol: pim-sm, UpTime: 00:16:56, Expires: 00:02:34
IPv6 PIM-SM admin-scope zone configuration example
Network requirements
The receivers receive VOD information through multicast. The entire IPv6 PIM-SM domain is divided into
IPv6 admin-scope zone 1, IPv6 admin-scope zone 2, and the IPv6 global scope zone. Router B, Router
C, and Router D are ZBRs of the three domains, respectively.
Source 1 and Source 2 send different multicast information to FF14::101. Host A receives the multicast
information from Source 1 only, and Host B receives the multicast information from Source 2 only. Source
3 sends multicast information to FF1E::202. Host C is a multicast receiver for this multicast group.
Serial 3/1/1 of Router B acts as a C-BSR and C-RP of IPv6 admin-scope zone 1, which serve the IPv6
multicast groups with the Scope field value in their group addresses being 4. Serial 3/1/1 of Router D
acts as a C-BSR and C-RP of admin-scope zone 2, which also serve the IPv6 multicast groups with the
Scope field value in their group addresses being 4. Serial 3/1/1 of Router F acts as a C-BSR and a C-RP
of the global scope zone, which serve IPv6 multicast groups with the Scope field value in their group
addresses being 14.
MLDv1 runs between Router A, Router E, Router I, and their respective receivers.