R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide

395
The clients of a route reflector should not be fully meshed, and the route reflector reflects the routes of a
client to the other clients. If the clients are fully meshed, you must disable route reflection between clients
to reduce routing costs.
If a cluster has multiple route reflectors, you must specify the same cluster ID for these route reflectors to
avoid routing loops.
To configure an IPv6 BGP route reflector:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 MBGP address
family view.
ipv6-family multicast N/A
4. Configure the router as a route
reflector and specify an IPv6
MBGP peer or a peer group
as its client.
peer { ipv6-group-name |
ipv6-address } reflect-client
Not configured by default.
5. Enable route reflection
between clients.
reflect between-clients
Optional.
Enabled by default.
6. Configure the cluster ID of the
route reflector.
reflector cluster-id cluster-id
Optional.
A route reflector uses its router ID
as the cluster ID by default.
Displaying and maintaining IPv6 MBGP
Displaying IPv6 MBGP
Task Command Remarks
Display IPv6 MBGP peer group
information.
display bgp ipv6 multicast group
[ ipv6-group-name ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display IPv6 MBGP routing
information injected with the
network command.
display bgp ipv6 multicast network [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the IPv6 MBGP AS path
information for routes.
display bgp ipv6 multicast paths
[ as-regular-expression | | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IPv6 MBGP peer
information or peer group
information.
display bgp ipv6 multicast peer [ [ ipv6-address ]
verbose ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display the prefix entries in the
ORF information for the specified
BGP peer.
display bgp ipv6 multicast peer ipv6-address
received ipv6-prefix [ | { begin | exclude |
include } regular-expression ]
Available in any
view.