R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide

404
[RouterA-Ethernet1/1] pim sm
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] pim sm
[RouterA-Ethernet1/2] quit
[RouterA] pim
[RouterA-pim] c-bsr ethernet 1/2
[RouterA-pim] c-rp ethernet 1/2
3. On Router B, enable IP multicast routing, and enable PIM-SM on each interface.
<RouterB> system-view
[RouterB] multicast routing-enable
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] pim sm
[RouterB-Ethernet1/1] quit
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] pim sm
4. On Router C, enable IP multicast routing, enable PIM-SM on each interface, and enable IGMP on
Ethernet 1/1.
<RouterC> system-view
[RouterC] multicast routing-enable
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] pim sm
[RouterC-Ethernet1/1] igmp enable
[RouterC-Ethernet1/1] quit
[RouterC] interface ethernet 1/2
[RouterC-Ethernet1/2] pim sm
5. Configure Router D in the same way as you configure Router C. (Details not shown.)
6. Configure Router E:
# Enable IGMP snooping globally.
<RouterE> system-view
[RouterE] igmp-snooping
[RouterE-igmp-snooping] quit
# Create VLAN 100, assign GigabitEthernet 2/0/1 through GigabitEthernet 2/0/4 to this VLAN,
and enable IGMP snooping and PIM snooping in the VLAN.
[RouterE] vlan 100
[RouterE-vlan100] port gigabitethernet 2/0/1 to gigabitethernet 2/0/4
[RouterE-vlan100] igmp-snooping enable
[RouterE-vlan100] pim-snooping enable
[RouterE-vlan100] quit
7. Verify the configuration:
# On Router E, display the PIM snooping neighbor information of VLAN 100.
[RouterE] display pim-snooping neighbor vlan 100
Total number of neighbors: 4
VLAN ID: 100
Total number of neighbors: 4
Neighbor Port Expires Option Flags