R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

94
interface vlan-interface
Use interface vlan-interface to create a VLAN-interface and enter its view or enter the view of an existing
VLAN-interface.
Use undo interface vlan-interface to remove the specified VLAN-interface.
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
Views
System view
Default command level
2: System level
Parameters
vlan-interface-id: Specifies a VLAN-interface number in the range of 1 to 4094.
Usage guidelines
Create the VLAN before you create the VLAN-interface.
To configure an IP address for a VLAN-interface that will perform IP routing, use the ip address command
in VLAN-interface view.
Examples
# Create VLAN-interface 2, and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2]
Related commands
display interface vlan-interface
ip address
Use ip address to assign an IP address and subnet mask to a VLAN-interface.
Use undo ip address to remove the IP address and subnet mask for a VLAN-interface.
Syntax
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]
Default
No IP address is assigned to any VLAN-interface.
Views
VLAN-interface view