R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

104
untagged: Configures the ports to send the untagged packets of the specified VLANs.
Usage guidelines
A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times, the
VLANs the hybrid port carries are the set of VLANs specified by vlan-list in each execution.
The configuration made in Ethernet interface view applies only to the port.
The configuration made in port group view applies to all ports in the port group.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its
aggregation member ports.
• If the system fails to apply the configuration to the aggregate interface, it stops applying the
configuration to aggregation member ports.
• If the system fails to apply the configuration to an aggregation member port, it skips the port and
moves to the next member port.
Examples
# Assign the hybrid port GigabitEthernet 4/0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN 100,
and configure GigabitEthernet 4/0/1 to send packets of these VLANs with tags kept.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] port link-type hybrid
[Sysname-GigabitEthernet4/0/1] port hybrid vlan 2 4 50 to 100 tagged
# Assign hybrid ports in port group 2 to VLAN 2, and configure these hybrid ports to send packets of
VLAN 2 with VLAN tags removed.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] port-group manual 2
[Sysname-port-group-manual-2] group-member GigabitEthernet 4/0/1 to GigabitEthernet
4/0/6
[Sysname-port-group-manual-2] port link-type hybrid
[Sysname-port-group-manual-2] port hybrid vlan 2 untagged
Configuring GigabitEthernet4/0/1... Done.
Configuring GigabitEthernet4/0/2... Done.
Configuring GigabitEthernet4/0/3... Done.
Configuring GigabitEthernet4/0/4... Done.
Configuring GigabitEthernet4/0/5... Done.
Configuring GigabitEthernet4/0/6... Done.
# Assign the hybrid Layer 2 aggregate interface Bridge-Aggregation 1 and its member ports to VLAN 2,
and configure them to send packets of VLAN 2 with tags removed.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 2 untagged
Please wait... Done.
Configuring GigabitEthernet4/0/1... Done.
Configuring GigabitEthernet4/0/2... Done.
Configuring GigabitEthernet4/0/3... Done.