R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

174
Command 6602 HSR6602 6604/6608/6616
lldp compliance cdp No No
Yes on routers installed with
the MPU RPE-X1 or RSE-X1
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp
Related commands
• lldp hold-multiplier
• lldp timer tx-interval
lldp enable
Use lldp enable to enable LLDP.
Use undo lldp enable to disable LLDP.
Syntax
lldp enable
undo lldp enable
Default
LLDP is enabled on a port and disabled globally.
Views
System view, Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
LLDP takes effect on a port only when LLDP is enabled both globally and on the port.
The following matrix shows the command and router compatibility in Layer 2 Ethernet interface view:
Command 6602 HSR6602 6604/6608/6616
lldp enable No No
Yes on SAP modules
operating in bridge mode
The following matrix shows the command and router compatibility in port group view:
Command 6602 HSR6602 6604/6608/6616
lldp enable No No
Yes on routers installed with
the MPU RPE-X1 or RSE-X1
Examples
# Disable LLDP on GigabitEthernet 4/0/1.