R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

182
Default command level
2: System level
Parameters
interval: Sets the LLDPDU transmit interval in the range of 5 to 32768 seconds.
Usage guidelines
It is a good practice to set the LLDPDU transmit interval to be no less than four times the LLDPDU transmit
delay.
If the LLDPDU transmit interval is less than the LLDPDU transmit delay, the device uses the LLDPDU transmit
delay as the transmit interval.
Examples
# Set the LLDPDU transmit interval to 20 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-interval 20
Related commands
lldp timer tx-delay
lldp tlv-enable
Use lldp tlv-enable to configure the types of advertisable TLVs for a port or all ports in a port group.
Use undo lldp tlv-enable to disable the advertising of specific types of TLVs.
Syntax
In Layer 2 Ethernet interface view or port group view:
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } |
dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability
| inventory | location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> |
elin-address tel-number } | network-policy | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id | vlan-name } | dot3-tlv { all |
link-aggregation | mac
-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location-id | network-policy | power-over-ethernet } }
In Layer 3 Ethernet interface view:
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv
{ all | capability | inventory | location-id { civic-address device-type country-code { ca-type
ca-value }&<1-10> | elin-address tel-number } | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot3-tlv { all | link-aggregation | mac-physic | max
-frame-size | power } | med-tlv
{ all | capability | inventory | location-id | power-over-ethernet } }