R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

101
HDLC link bundling configuration commands
bandwidth
Use bandwidth to set the intended bandwidth for a HDLC link bundle interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
HDLC link bundle interface view
Default command level
2: System level
Parameters
bandwidth-value: Specifies the intended bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by using third-party software to query the value
of the MIB ifspeed.
The intended bandwidth of an interface is for the network management system to monitor the interface
bandwidth, and does not affect the actual bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] bandwidth 1000
bundle id
Use bundle id to assign the interface to an HDLC link bundle.
Use undo bundle id to remove the interface from an HDLC link bundle.
Syntax
bundle id bundle-id
undo bundle id
Views
Interface view
Default command level
2: System level