R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

106
Default command level
2: System level
Parameters
text: Description of an interface, a case-sensitive string of 1 to 240 characters.
Examples
# Configure the description of HDLC link bundle interface 1 as hdlc-bundle interface.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] description hdlc-bundle interface
display bundle member hdlc-bundle
Use display bundle member hdlc-bundle to display information about a specific HDLC link bundle.
Syntax
display bundle member hdlc-bundle [ bundle-id ] [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bundle-id: Number of an HDLC link bundle.
slot slot-number: Specifies the slot number of an HDLC link bundle interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The command output includes the following information:
• Basic information about the HDLC link bundle, including the limit on the number of selected member
interfaces in the HDLC link bundle, the number of selected member interfaces required to bring up
the HDLC link bundle, the minimum amount of bandwidth required to bring up the HDLC link bundle,
the number of selected member interfaces, and the total bandwidth of all the selected member
interfaces
• The slot number of the HDLC link bundle interface
• Information about individual member interfaces, including the name, state, bandwidth, and
bundling priority of each member interface