R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

114
You can use this function to achieve the following purposes:
• Alleviate the processing pressure on a card and make efficient use of processing capabilities of
service cards.
• Avoid the change of processing card caused by the selected state changes of member interfaces
that are located on different cards.
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
service No Yes Yes
Examples
# Specify the card in slot 2 to process or forward traffic for interface HDLC-bundle 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] service slot 2
shutdown
Use shutdown to shut down an HDLC link bundle interface.
Use undo shutdown to bring up an HDLC link bundle interface.
Syntax
shutdown
undo shutdown
Default
An HDLC link bundle interface is up.
Views
HDLC link bundle interface view
Default command level
2: System level
Usage guidelines
Enabling/disabling an HDLC link bundle interface does not enable or disable any member interface in
the HDLC link bundle, but the operation can affect the selected state of the member interfaces. When an
HDLC link bundle interface is disabled, no member interface can be in the selected state to forward
traffic.
Examples
# Shut down HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] shutdown