R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

146
[Sysname] interface serial 2/0/0
[Sysname-Serial2/0/0] link-protocol fr mfr 4
mfr bundle-name
Use mfr bundle-name to set frame relay bundle identifier (BID).
Use undo mfr bundle-name to restore the default.
Syntax
mfr bundle-name [ name ]
undo mfr bundle-name
Default
The BID of an MFR bundle is represented by MFR plus frame relay bundle number, for example, MFR4.
Views
MFR interface view
Default command level
2: System level
Parameters
name: Bundle identification, which is a string of 1 to 49 characters.
Usage guidelines
You cannot configure a BID as a string in the form of MFR + number.
Each MFR bundle has a BID, and the peer device can identify an MFR bundle by BID. Different BIDs can
be used at both ends of a link.
The BIDs at both ends are used during the link bundle negotiation phase. After changing the BID of an
MFR interface, you must execute the shutdown and undo shutdown command on the interface to make
the new BID take effect.
Examples
# Set the frame relay link MFR4 BID to bundle1.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] mfr bundle-name bundle1
mfr fragment
Use mfr fragment to enable fragmentation on the MFR bundle.
Use undo mfr fragment to disable the function.
Syntax
mfr fragment
undo mfr fragment
Default
Fragmentation is disabled on the MFR bundle.