R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide
14
<Sysname> display interface virtual-ethernet 1/0/1
Virtual-Ethernet1/0/1 current state: UP
Line protocol current state: UP
Description: Virtual-Ethernet1/0/1 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 00e0-fc0d-9485
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 00e0-fc0d-9485
Physical is EoPW, baudrate: 10000000 bps
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
# Display detailed information about interface Virtual-Ethernet 1/0/2. (Assume the interface does not
support traffic accounting.)
<Sysname> display interface virtual-ethernet 1/0/2
Virtual-Ethernet1/0/2 current state: DOWN
Line protocol current state: DOWN
Description: Virtual-Ethernet1/0/2 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0023-8970-1fd7
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0023-8970-1fd7
Last clearing of counters: Never
# Display brief information about interface Virtual-Ethernet 1/0/1.
<Sysname> display interface virtual-ethernet 1/0/1 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
VE1 DOWN DOWN --
# Display brief information about all VE interfaces in down state.
<Sysname> display interface virtual-ethernet brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
VE1 DOWN Not connected










