R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

36
Parameters
value: Specifies the transmission priority in the range of 0 to 9. A higher value indicating a higher
priority.
The priority level for the UBR service is in the range of 0 to 4.
The priority level for the nrt-VBR service is in the range of 5 to 7.
The priority level for the rt-VBR service is in the range of 8 to 9.
Usage guidelines
If you change the service type of a PVC, the transmission priority of the PVC changes to the default for the
current service.
Only MIM-ATM cards support this command.
Examples
# Set the transmission priority of ATM PVC 1/32 to 3.
<Sysname> system-view
[Sysname] interface atm 1/0/1
[Sysname-Atm1/0/1] pvc 1/32
[Sysname-atm-pvc-Atm1/0/1-1/32] transmit-priority 3