R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

49
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
VT interface view, MP-group interface view
Default command level
2: System level
Parameters
bandwidth-value: Specifies the intended bandwidth, ranging from 1 to 4294967295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by querying the ifspeed value of the MIB node
with third-party software.
The intended bandwidth is used by the network for bandwidth monitoring. It does not affect the actual
bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for interface VT 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] bandwidth 1000
# Set the intended bandwidth to 1000 kbps for interface MP-group 3.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3] bandwidth 1000
broadcast-limit link
Use broadcast-limit link to set the maximum number of links that can be used for transmitting multicast
packets or broadcast packets for the VT.
Use undo broadcast-limit link to restore the default.
Syntax
broadcast-limit link number
undo broadcast-limit link
Default
The maximum number of links that can be used for transmitting multicast or broadcast packets is 30 for
a VT.
Views
VT interface view
Default command level
2: System level