R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

51
[Sysname] interface mp-group 3
[Sysname-Mp-group3] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to set the description for the VT or MP-group interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
A VT or MP-group interface is described in the form of interface name Interface (for example,
Virtual-Template1 Interface).
Views
VT interface view, MP-group interface view
Default command level
2: System level
Parameters
text: Interface description, a case-sensitive character string of 1 to 80 characters.
Examples
# Set the description for interface VT 10 to virtual-interface.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] description virtual-interface
# Set the description for interface MP-group 3 to mpgroup-interface.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3] description mpgroup-interface
display interface mp-group
Use display interface mp-group to display information about the specified MP-group interface or all
existing MP-group interfaces.
Syntax
display interface mp-group mp-number [ brief ] [ | { begin | exclude | include } regular-expression ]
display interface [ mp-group ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level