R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

81
<Sysname> system-view
[Sysname] l2tp-group 2
[Sysname-l2tp2] allow l2tp virtual-template 1 remote aaa
# Specify L2TP group 1 as the default L2TP group, accept the L2TP tunneling request initiated by any peer,
and create a VA interface based on virtual template 1.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] allow l2tp virtual-template 1
Related commands
l2tp-group
display l2tp session
Use display l2tp session to display information about L2TP sessions.
Syntax
display l2tp session [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about L2TP sessions.
<Sysname> display l2tp session
Total session = 1
LocalSID RemoteSID LocalTID
17922 12990 1
Table 14 Command output
Field Descri
p
tion
Total session Number of active sessions.
LocalSID Unique ID of the session at the local end.
RemoteSID Unique ID of the session at the remote end.