R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Configuration Guide

47
Ste
p
Command Remarks
4. Set the maximum delay of
transmitting an LFI fragment or the
maximum size (in bytes) of LFI
fragments.
• ppp mp lfi
delay-per-frag time
• ppp mp lfi size-per-frag
size
Use either command.
The default maximum delay of
transmitting an LFI fragment is 10
ms, and the default maximum size
of LFI fragments depends on the
configuration of the ppp mp lfi
delay-per-frag command.
Displaying and maintaining PPP and MP
Task Command Remarks
Display information about one or
all existing MP-group interfaces.
display interface mp-group mp-number
[ brief ] [ | { begin | exclude | include }
regular-expression ]
display interface [ mp-group ] [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about a VA
interface or all the VA interfaces on
a VT interface.
display virtual-access [ va-number | peer
peer-address | slot slot-number | user
user-name | vt vt-number ] * [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about an
existing VT interface.
display interface virtual-template number
[ brief ] [ | { begin | exclude | include }
regular-expression ]
display interface [ virtual-template ] [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about an MP
interface.
display ppp mp [ interface interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Clear statistics on a specified
interface.
reset counters interface [ mp-group
[ interface-number ] ]
reset counters interface [ virtual-template
[ interface-number ] ]
Available in user view
PPP and MP configuration examples
One-way PAP authentication configuration example
Network requirements
As shown in Figure 12, Router A and Router B are interconnected through their Serial 2/0/1 interfaces.
Configure Router A to authenticate Router B by using PAP, but Router B not to authenticate Router A.