R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

120
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
ospf non-stop-routing No No
• Yes when using the RPE-X1 or RSE-X1
MPU
• No when using the MCP MPU
Examples
# Enable OSPF NSR.
<Sysname> system-view
[Sysname] ospf non-stop-routing
ospf packet-process prioritized-treatment
Use ospf packet-process prioritized-treatment to enable OSPF to give priority to receiving and
processing Hello packets.
Use undo ospf packet-process prioritized-treatment to restore the default.
Syntax
ospf packet-process prioritized-treatment
undo ospf packet-process prioritized-treatment
Default
This function is not enabled.
Views
System view
Default command level
2: System level
Examples
# Enable OSPF to give priority to receiving and processing Hello packets.
<Sysname> system-view
[Sysname] ospf packet-process prioritized-treatment
ospf timer dead
Use ospf timer dead to set the dead interval.
Use undo ospf timer dead to restore the default.
Syntax
ospf timer dead seconds
undo ospf timer dead
Default
The dead interval is 40 seconds for Broadcast and P2P interfaces and is 120 seconds for P2MP and
NBMA interfaces.