R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

224
Field Description
type
Type of the BGP peer group:
• IBGP.
• EBGP.
Maximum allowed prefix number
Maximum prefixes allowed to receive from the peer
group.
Threshold
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer
group. If the percentage is reached, the system
generates alarm messages.
Configured hold timer value Holdtime interval.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval for route advertisements.
Peer Preferred Value Preferred value specified for the routes from the peer.
Members(* - Dynamically created peer)
Detailed information about the members in the peer
group. An asterisk (*) before a peer indicates that the
peer is a dynamically created peer.
Peer IPv4 address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down
Duration of the session/duration of the current state
(when no session is established).
State State machine state of the peer.
display bgp network
Use display bgp network to display routing information advertised with the network command.
Syntax
display bgp network [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.