R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

312
Examples
# Create permit-mode of Node 10 for policy 1, and enter policy node view.
<Sysname> system-view
[Sysname] policy-based-route policy1 permit node 10
[Sysname-pbr-policy1-10]
reset policy-based-route statistics
Use reset policy-based-route statistics to clear PBR statistics.
Syntax
reset policy-based-route statistics [ policy-name ]
Views
User view
Default command level
1: Monitor level
Parameters
policy-name: Specifies a policy by its name, a string of 1 to 19 characters.
Usage guidelines
If no policy is specified, this command clears all the PBR statistics.
Examples
# Clear all PBR statistics.
<Sysname> reset policy-based-route statistics