R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

372
Default
The maximum number of ECMP routes is 8.
Views
OSPFv3 view
Default command level
2: System level
Parameters
maximum: Specifies the aximum number of ECMP routes, in the range of 1 to 8.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6
ospfv3
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
Syntax
ospfv3 [ process-id ] [ vpn-instance vpn-instance-name ]
undo ospfv3 [ process-id ]
Default
The system runs no OSPFv3 process.
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the OSPFv3 process belongs to the public network.
Usage guidelines
Specify a router ID for the OSPFv3 process. Otherwise, the OSPFv3 process cannot generate LSAs.
Examples
# Enable the OSPFv3 process with process ID as 120 and configure the Router ID as 1.1.1.1.
<Sysname> system-view
[Sysname] ospfv3 120
[Sysname-ospfv3-120] router-id 1.1.1.1