R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

504
internal: Matches internal routes (OSPF intra-area and inter-area routes).
is-is-level-1: Matches IS-IS Level-1 routes.
is-is-level-2: Matches IS-IS Level-2 routes.
nssa-external-type1: Matches OSPF NSSA Type 1 external routes.
nssa-external-type1or2: Matches OSPF NSSA Type 1 or 2 external routes.
nssa-external-type2: Matches OSPF NSSA Type 2 external routes.
Examples
# Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type internal
if-match tag
Use if-match tag to match routing information having the specified tag.
Use undo if-match tag to remove the match criterion.
Syntax
if-match tag value
undo if-match tag
Default
No tag match criterion is not configured.
Views
Routing policy view
Default command level
2: System level
Parameters
value: Specifies a tag in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode of routing policy policy1 to match RIP, OSPF and IS-IS routing
information having a tag of 8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
ip as-path
Use ip as-path to create an AS path list.
Use undo ip as-path to remove an AS path list.
Syntax
ip as-path as-path-number { deny | permit } regular-expression