R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Configuration Guide

93
Task Command Remarks
Display virtual link information.
display ospf [ process-id ] vlink [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF request queue
information.
display ospf [ process-id ] request-queue
[ interface-type interface-number ] [ neighbor-id ]
[ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display OSPF retransmission
queue information.
display ospf [ process-id ] retrans-queue
[ interface-type interface-number ] [ neighbor-id ]
[ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display OSPF ABR and ASBR
information.
display ospf [ process-id ] abr-asbr [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF interface
information.
display ospf [ process-id ] interface [ all |
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF error information.
display ospf [ process-id ] error [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF ASBR
summarization information.
display ospf [ process-id ] asbr-summary
[ ip-address { mask | mask-length } ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the global router ID.
display router id [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Clear OSPF statistics.
reset ospf [ process-id ] counters [ neighbor
[ interface-type interface-number ] [ router-id ] ]
Available in user
view.
Reset an OSPF process. reset ospf [ process-id ] process [ graceful-restart ]
Available in user
view.
Support for this
command depends
on the device
model.
Re-enable OSPF route
redistribution.
reset ospf [ process-id ] redistribution
Available in user
view.
The following matrix shows the feature of resetting an OSPF process and router compatibility:
Feature 6602 HSR6602 6604/6608/6616
Resetting an OSPF
process
No No
• Yes when using the RPE-X1 or RSE-X1 MPU
• No when using the MCP MPU
OSPF configuration examples
These configuration examples only cover OSPF configuration related commands.