R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Configuration Guide

106

Figure 27 Network diagram

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure OSPF basic functions:

# Configure Router A.

<RouterA> system-view

[RouterA] router id 1.1.1.1

[RouterA] ospf

[RouterA-ospf-1] area 0

[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterA-ospf-1-area-0.0.0.0] quit

[RouterA-ospf-1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] router id 2.2.2.2

[RouterB] ospf

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterB-ospf-1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] router id 3.3.3.3

[RouterC] ospf

[RouterC-ospf-1] area 0

[RouterC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] quit

[RouterC-ospf-1] quit

# Configure Router D.

<RouterD> system-view

[RouterD] router id 4.4.4.4

[RouterD] ospf

[RouterD-ospf-1] area 0

[RouterD-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterD-ospf-1-area-0.0.0.0] quit