R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-G Router

259

Figure 78 Network diagram

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure BGP connections:

# Configure Router A.

<RouterA> system-view

[RouterA] bgp 100

[RouterA-bgp] peer 192.1.1.2 as-number 200

# Inject network 1.0.0.0/8 to the BGP routing table.

[RouterA-bgp] network 1.0.0.0

[RouterA-bgp] quit

# Configure Router B.

<RouterB> system-view

[RouterB] bgp 200

[RouterB-bgp] peer 192.1.1.1 as-number 100

[RouterB-bgp] peer 193.1.1.1 as-number 200

[RouterB-bgp] peer 193.1.1.1 next-hop-local

[RouterB-bgp] quit

# Configure Router C.

<RouterC> system-view

[RouterC] bgp 200

[RouterC-bgp] peer 193.1.1.2 as-number 200

[RouterC-bgp] peer 194.1.1.2 as-number 200

[RouterC-bgp] quit

# Configure Router D.

<RouterD> system-view

[RouterD] bgp 200

[RouterD-bgp] peer 194.1.1.1 as-number 200

[RouterD-bgp] quit

3. Configure the route reflector:

# Configure Router C as the route reflector.

[RouterC] bgp 200

[RouterC-bgp] peer 193.1.1.2 reflect-client

[RouterC-bgp] peer 194.1.1.2 reflect-client

[RouterC-bgp] quit