R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

144
Views
System view
Default command level
2: System level
Parameters
per-flow: Enables flow-based load sharing.
src-ip: Identifies flows by source IP address.
all: Specifies all cards.
The following matrix shows the keyword and router compatibility:
Keyword 6602 HSR6602 6604/6608/6616
all No Yes Yes
slot slot-number: Specifies a card. The slot-number argument refers to the card slot number.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
Examples
# On an 6602 router, configure packet-based load sharing.
<Sysname> system-view
[Sysname] ip load-sharing mode per-packet
# On an HSR6602/6604/6608/6616 router, configure packet-based load sharing on slot 2.
<Sysname> system-view
[Sysname] ip load-sharing mode slot 2 per-packet
load-bandwidth
Use load-bandwidth to specify the bandwidth of the interface for load sharing.
Use undo load-bandwidth to restore the default.
Syntax
load-bandwidth bandwidth
undo load-bandwidth
Default
The load sharing bandwidth of an interface is the physical bandwidth of the interface.
Views
Interface view
Default command level
2: System level