R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

172
Field Descri
p
tion
IPv6 Address
IPv6 address of the interface. Only the first of configured IPv6
addresses is displayed. If no address is configured for the interface,
Unassigned is displayed.
display ipv6 neighbors
Use display ipv6 neighbors to display neighbor information.
Syntax
display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-address: IPv6 address whose neighbor information is to be displayed.
all: Displays information about all neighbors, including neighbors acquired dynamically and configured
statically on the public network and all private networks.
dynamic: Displays information about all neighbors acquired dynamically.
static: Displays information about all neighbors configured statically.
slot slot-number: Displays neighbor information for the specified card.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
interface interface-type interface-number: Displays information about the neighbors of a specific
interface.
vlan vlan-id: Displays information about the neighbors of a specific VLAN whose ID is in the range of 1
to 4094.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
vlan vlan-id No No
Yes on routers configured with SAP modules
that operate in bridge mode.
verbose: Displays detailed information about neighbors.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.