R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

260
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display AFT statistics.
<Sysname> display aft statistics
Statistics:
Total Sessions: 0
Expired Sessions: 0
Hits: 0
Misses: 0
Total Address Mappings: 0
Enabled Interfaces:
GigabitEthernet3/0/1
Table 68 Command output
Field Descri
p
tion
Total Sessions Total number of AFT sessions.
Expired Sessions Number of expired AFT sessions.
Hits
Number of successful attempts to match a packet with an AFT
session.
Misses Number of failed attempts to match a packet with an AFT session.
Total Address Mappings Total number of address mappings.
Enabled Interfaces Interfaces on which AFT is enabled.
Related commands
reset aft statistics
aft address-group
Use aft address-group to create an AFT address pool.
Use undo aft address-group to delete a specific AFT address pool.
Syntax
aft address-group group-number start-ipv4-address end-ipv4-address
undo aft address-group group-number
Views
System view
Default Level
2: System level
Parameters
group-number: Number of an address pool, in the range of 1 to 32.