R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

273
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Tun1 DOWN Not connected
Table 70 Command output
Field Descri
p
tion
The brief information of
interface(s) under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
Link status:
• ADM—The interface has been administratively shut down by the undo
shutdown command.
• Stby—The interface is a backup interface.
Protocol: (s) - spoofing
(s) indicates that the network layer protocol state is UP, but the link is not
available because it is either an on-demand link or not present at all.
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To bring it up,
perform the undo shutdown command.
• Stby—The interface is a backup interface.
Protocol
Protocol state:
• DOWN—The protocol is disabled.
• UP—The protocol is enabled.
Main IP Primary IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been shut down with the
shutdown command, this field displays Administratively. To bring up the
port, use the undo shutdown command.
Related commands
• interface tunnel
• source
• destination
• tunnel-protocol
display ipv6 interface tunnel
Use display ipv6 interface tunnel to display IPv6 information for tunnel interfaces.
Syntax
display ipv6 interface tunnel [ number ] [ brief ] [ | { begin | exclude | include } regular-expression ]
Views
Any view