R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

92
Table 38 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled Ethernet interface.
Tunnel Dest Tunnel destination, in the format of X.X.X.X.
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X.
Token Bucket rate Token bucket rate, a traffic parameter.
Token Bucket Size Token bucket size, a traffic parameter.
display mpls rsvp-te rsb-content
Use display mpls rsvp-te rsb-content to display information about RSVP-TE reservation state blocks
(RSBs).
Syntax
display mpls rsvp-te rsb-content ingress-lsr-id Ispid tunnel-id egress-lsr-id nexthop-address [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ingress-lsr-id: Ingress LSR ID.
lspid: Local LSP ID in the range of 1 to 65535.
tunnel-id: Tunnel ID in the range of 0 to 65535.
egress-lsr-id: Egress LSR ID.
nexthop-address: Next hop address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about RSVP-TE RSBs.
<Sysname> display mpls rsvp-te rsb-content 19.19.19.19 1 0 29.29.29.29 101.101.101.2
The RSB Content:
Tunnel Dest: 29.29.29.29 Session Tunnel ID: 0
Tunnel ExtID: 19.19.19.19
Next Hop: 101.101.101.2 Reservation Style: SE Style
Reservation Incoming Interface: GigabitEthernet2/1/1