R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

95
<Sysname> display mpls rsvp-te sender
Interface: GigabitEthernet2/1/1
Tunnel Dest: 19.19.19.19 Ingress LSR ID: 29.29.29.29
LSP ID: 1 Session Tunnel ID: 0
Session Name: Tunnel0
Previous Hop Address: 101.101.101.2
Token bucket rate: 0.0 Token bucket size: 0.00
Interface: Incoming-Interface at the Ingress
Tunnel Dest: 29.29.29.29 Ingress LSR ID: 19.19.19.19
LSP ID: 1 Session Tunnel ID: 0
Session Name: Tunnel1
Previous Hop Address: 19.19.19.19
Token bucket rate: 0.0 Token bucket size: 0.00
Table 40 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled Ethernet interface.
Tunnel Dest Tunnel destination, in the format of X.X.X.X.
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X.
Previous Hop Address Previous hop address, in the format of X.X.X.X.
Token Bucket rate Token bucket rate, a traffic parameter.
Token Bucket Size Token bucket size, a traffic parameter.
display mpls rsvp-te statistics
Use display mpls rsvp-te statistics to display statistics about RSVP-TE.
Syntax
display mpls rsvp-te statistics { global | interface [ interface-type interface-number ] } [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
global: Display global RSVP-TE information.
interface: Displays statistics about RSVP-TE for a specific interface or, if no interface is specified, all
interfaces.
interface-type interface-number: Specifies an interface for which statistics about RSVP-TE is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.