R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

111
Table 53 Command output
Field Descri
p
tion
No Number.
LSP-Id
LSP ID of the tunnel.
A value containing an * indicates that the CR-LSP is the reverse CR-LSP of a
bidirectional tunnel.
The device does not support bidirectional MPLS TE tunnel.
Tunnel-Name Tunnel name configured on the ingress node.
Destination Destination router ID.
In-Interface Incoming interface.
Out-Interface Outgoing interface.
Tunnel BW Tunnel bandwidth.
Class Type Service class type.
Ingress LSR-Id
Ingress LSR ID.
A value containing an * indicates that the CR-LSP is the reverse CR-LSP of a
bidirectional tunnel.
The device does not support bidirectional MPLS TE tunnel.
Egress LSR-Id Egress LSR-ID.
Setup-Priority Setup priority of link.
Hold-Priority Holding priority of link.
Sign-Protocol Signaling protocol.
Resv Style Reservation style.
IncludeAnyAff Any affinity properties that must be included.
ExcludeAllAff Link properties that are excluded.
IncludeAllAff All link affinity properties that must be included.
Created Time Time when the tunnel was created.
display mpls te tunnel path
Use display mpls te tunnel path to display the path or paths that the specified or all MPLS TE tunnels
traverse on this node.
Syntax
display mpls te tunnel path [ lsp-id lsr-id lsp-id | tunnel-name tunnel-name ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level