R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

117
LS Seq Number :
CheckSum :
Link Type :Point to Point / Point to Multi Point /MultiAccess
Link ID :
Local Interface Address : xxx.xxx.xxx.xxx
Remote Interface Address : xxx.xxx.xxx.xxx
TE Metric :
Maximum Bandwidth : bytes/sec
Maximum Reservable BW : bytes/sec
Admin Group :
Unreserved Bandwidth for each TE Class:
Unreserved BW [ 0] = 0 bytes/sec
Unreserved BW [ 1] = 0 bytes/sec
Unreserved BW [ 2] = 0 bytes/sec
Unreserved BW [ 3] = 0 bytes/sec
Unreserved BW [ 4] = 0 bytes/sec
Unreserved BW [ 5] = 0 bytes/sec
Unreserved BW [ 6] = 0 bytes/sec
Unreserved BW [ 7] = 0 bytes/sec
Unreserved BW [ 8] = 0 bytes/sec
Unreserved BW [ 9] = 0 bytes/sec
Unreserved BW [10] = 0 bytes/sec
Unreserved BW [11] = 0 bytes/sec
Unreserved BW [12] = 0 bytes/sec
Unreserved BW [13] = 0 bytes/sec
Unreserved BW [14] = 0 bytes/sec
Unreserved BW [15] = 0 bytes/sec
Bandwidth Constraints:
BC [ 0] = bytes/sec
BC [ 1] = bytes/sec
Table 57 Command output
Field Descri
p
tion
Area ID TE enabled OSPF area ID.
LSA Type
LSA type which must be Opd-Area, carried in the
Opaque LSA header.
Opaque Type 1 for TE, carried in the header of Opaque LSA.
Opaque ID Opaque ID, carried in the header of Opaque LSA.
Advertising Router ID Router ID of the node where the LSA was generated.
LSA age LSA age, carried in the header of Opaque LSA.
Length LSA length, carried in the header of Opaque LSA.
LSA Options LSA options, carried in the header of Opaque LSA.